Amprobe TH-1 User Manual - Page 6

Browse online or download pdf User Manual for Measuring Instruments Amprobe TH-1. Amprobe TH-1 7 pages. Relative humidity / temperature probe style meter

Print Page

SyMboLS

�

Refer to the manual

Conforms to relevant

�

Australian standards.

�

Warning and Precautions

Do not put the probe in contact with liquids. That may cause

permanent damage.

INTRoDUCTIoN

Congratulations on your purchase of the TH-1 temperature probe style

meter. This meter is equipped with a protective turnable sensor cap, a

patented design, to protect the sensor when not in use.

A convenient instrument to measure temperature from -20°C to 60°C

(4° to 140°F), Relative Humidity up to 99% RH, and the dew point (DP)

or wet bulb (WB) for temperature and humidity.

Unpack and Inspection

1 x TH-1 Temperature Probe style meter

1 x Battery CR2032

1 x Manual

oPERATIoN

Before you start any measurement, please rotate the cap clockwise

or counterclockwise to expose the sensor.

Press ON/OFF yellow pushbutton to turn power ON or OFF. You will

see a full display on the screen for one second.(See Fig.1) The meter

will start measuring the temperature and humidity and display both

readings at the same time. (See Fig.2)

Press HOLD until "HLD" appears on the screen to freeze the reading

on the display. Press HOLD again to cancel the HOLD function and

continue with the measurement.(See FIG.3)

Press MIN/MAX to display the minimum reading of the actual

measurement (Temp & RH). Press MIN/MAX again to display the

maximum reading. Press MIN/MAX again to return the real time

measurement.(See Fig.4)

Press °C / °F pushbutton to switch between degrees Celsius to

degrees Fahrenheit.

Press MODE to toggle between "AIR", "DP", and "WB" readings.

Press and hold RESET to clear current MIN and MAX readings from

memory

Auto Power off

The meter will turn itself off after 20-min. To override Auto Power Off

function, press ON/OFF & HOLD keys simultaneously. The display will

show "n". When "n" appears, release the ON/OFF button. The meter

will now be in Non-sleep mode for long time operation purposes. (See

Fig.5)

Complies with EU

�

directives

Do not dispose

�

of this product as

unsorted municipal

waste.