Amprobe TH-1 User Manual - Page 7

Browse online or download pdf User Manual for Measuring Instruments Amprobe TH-1. Amprobe TH-1 7 pages. Relative humidity / temperature probe style meter

Amprobe TH-1 User Manual

bATTERy REPLACEMENT

1.
Turn off the meter. Use a coin to open the battery cover.
2.
Put the battery (CR2032) with the "+" faces up.
3.
Replace the cover.

TRoUbLESHooTINg

POWER ON BUT NO DISPLAY
Make sure you press the "ON/ OFF" key for more than 100mS.
Check the battery conditions and replace if necessary
DISPLAY DISAPPEARS
Check for low battery indicator before the display is off. If the low
battery indicator appears, replace the battery.
Turn on the meter by pressing "ON/OFF+HOLD" keys to disable
Auto Power Off.
E02-Out of the lowest limit.
E03-Out of the highest limit.
E04-Check error message of the original data.
E11-Calibration required. The humidity sensor accuracy can not be
calibrated by the user due to special procedures required. Please
contact a qualified calibration house for service.
E33-Return the meter for repair

SPECIfICATIoNS

Size
Battery
Power consumption
Sensor
Range:
Relative Humidity 0 to 100%
Temperature
DP/WB
Accuracy:
Relative Humidity ±3% from 10 to 95%RH and ±5% for other
Temperature
Resolution
The meter conforms to the following standards:
EN 50081-1/1992 : EN 55022
EN 50082-1/1997 : EN 55024
(EN 61000-4-2/-3/-8, ENV 50204)
17.5 × 4.2 × 1.6cm (6.89 x 1.65 x 0.63 in)
150 Hours
< 2.0mA
Electronic Capacitance Polymer Film Sensor
-20 to 50°C (-4 to 122°F)
-20 to 59.9°C / -5 to 59.9°C
(-4 to 139.8°F / 23 to 139.8°F)
RH range @ 25°C / 77°F
±0.6°C / ±1°F
0.1%, 0.1°C / 0.1°F
6