DPA 4062 User Manual - Page 9
Browse online or download pdf User Manual for Microphone DPA 4062. DPA 4062 16 pages. Miniature microphones
Print Page
Adjusting the Type 4066 Headband
The size of the headband mount may easi-
ly be adjusted. Change the standard bend
by carefully expanding the distance
between the earhooks.
The 4066 Adjustable Miniature Microphone
Headband is supplied with the boom mounted.
To change sides simply click the boom out
of the clips and follow the instructions
below.
• Hold the boom in your right hand when
mounting on the right side and vice versa.
Hold the boom by the cable relief.
• Position your hand with the boom between
the ear hooks and turn the boom around in
the loop. Take your hand with the boom
under the headband and draw it towards you.
• Secure the microphone boom into the
two clips next to the ear hook beneath
which the boom is to be mounted. Next,
secure the boom in the clip in the middle of
the headband. This clip is movable and should
be placed near the end of the microphone
boom, before the cable relief (where the
soft cable begins to be visible). The remaining
two clips are not used (unless two booms
are to be mounted on the same headband.)
The soft cable should not be attached into
the clips.
9