Advanced Avionics HyperBlast User Manual - Page 6

Browse online or download pdf User Manual for Battery Charger Advanced Avionics HyperBlast. Advanced Avionics HyperBlast 7 pages.

Print Page

The HyperBlast charger can be used in either 110 volt 60 hz countries, or in 220

Volt 50 Hz countries. It is very important to set the 110/220 switch on the rear of the

unit to the correct voltage. Failure to set this correctly will destroy the charger. If your

charger does not have this 110/220 switch, then it will autodetect the correct voltage.

Status LED

On Solid

Slow Blink – Once per second

Fast Blink – 5 times per second

All LEDs blinking rapidly in sequence

Battery Status

Battery is Rapid Charging

Battery has peaked and is now trickle

charging at 3% of capacity

Battery Charger has shut off because one

of the following:

a) The battery is full

b) The battery is > 50 Deg C

c) The charge time has expired

The Charger has detected an internal

charger temperature greater than 70 Deg

C. and has shut down all outputs. You

must turn the power off and back on in

order to reset the charger.

110/220

Voltage