AMQ Cluvo Manual - Page 10

Browse online or download pdf Manual for Indoor Furnishing AMQ Cluvo. AMQ Cluvo 13 pages.

Print Page
Changing LED Display Height between inches and centimeters
1.
Under LED standard display mode, enter the multiple selection interface.
2.
Select INCH/CM menu.
3.
Turn the knob to select the desired unit, then press the knob to confirm the selection and return
to the normal LED display.
Setting a Custom Maximum Height
1.
Under LED standard display mode, enter the multiple selection interface.
2.
Select Max/Min menu, then select Back, MAX HEIGHT, MIN HEIGHT, or RESET.
3.
When MAX HEIGHT or MIN HEIGHT is selected, turn the knob to select height, and press the
knob to confirm the selection.
4.
During the setting process, SETTING might display on LED. Most of the time, as the setting will
take effect immediately, the SETTING display might not be noticed by user.
5.
If the maximum height or minimum height setting is successful, LED display will show MAX
HEIGHT SET TO ****, or MIN HEIGHT SET TO ****.
6.
If the height setting is unsuccessful, MAX HEIGHT SET FAILED or MIN HEIGHT SET FAILED will
display on LED for 1 second, then return to the normal LED display interface.
Main Interface Display
1.
Under standard display interface, press the knob to enter multiple selection interface.
2.
Select DISPLAY INFO menu.
3.
Select SAVED HEIGHT, REMINDER TIME or MAX/MIN HEIGHT to display customized height,
sitting/standing timer, or customized maximum/minimum height to be displayed on the left of
normal LED display.
4.
Under height display interface, press sitting and standing memory buttons to active the standard
display on LED.
Setting the Minimum Height
1.
The desk has caster or glide version with different lowest height display.
2.
Under standard display interface, press the knob to enter multiple selection interface.
3.
Select CASTER menu. Then depending on desk configuration of whether coming with casters
or without casters, turn the knob to select WITH CASTER or WITHOUT CASTER. The height
difference between these 2 setting is around 1.3 inch. Press the knob to confirm the selection.
Anti-Collision Setting
1.
Under standard display interface, press the knob to enter multiple selection interface.
2.
Select OBSTRUCTION SETTING on the menu.
3.
Press the knob to show the sub-menu of OBSTURCION SETTING. Select the sensitivity (height
to lowest from top to bottom selection) and press the knob to confirm the selection. The
chosen sensitivity will show on LED display for 1 second, then return to standard display.
Barcode Display
1.
Under standard display interface, press the knob to enter multiple selection interface.
2.
Press WELCOME/USER GUIDE menu to display barcode. Scan the barcode to direct users to
AMQ website. Press knob to return to the previous menu.
Cluvo User / Troubleshooting Guide | 10
amqsolutions.com