AMS Controls XL200 Series Battery Replacement Manual - Page 8

Browse online or download pdf Battery Replacement Manual for Controller AMS Controls XL200 Series. AMS Controls XL200 Series 8 pages. Bar code scanner specifications
Also for AMS Controls XL200 Series: Specifications (8 pages), Battery Replacement Manual (5 pages), Battery Replacement Manual (8 pages)

Print Page

11. Insert the new Panasonic CR2330 battery with the positive (+) side facing up by inserting it from

the top side and sliding it under the clip until it snaps into place.

12. Close the boards back on top of the front panel. While lowering the board, reconnect the wires

to the back of the front panel.

13. Screw on the 8 nuts removed in step 5.

14. Place the back cover over the circuit boards.

15. Put the 6 screws back into place that were removed in steps 2 and 3.

16. Congratulations, you have successfully replaced the battery in your XL200 Rev A/B.

Figure 10 - Battery partially removed