Bosch ASCENTA SHX6AP Use And Care Manual - Page 12
Browse online or download pdf Use And Care Manual for Dishwasher Bosch ASCENTA SHX6AP. Bosch ASCENTA SHX6AP 21 pages. Bosch ascenta models dishwashers use & care manual
Also for Bosch ASCENTA SHX6AP: Use And Care Manual (21 pages), Use & Care Manual (26 pages)
OPERATING THE SHE5AM
& SHE5AL
@i@D
Child Lock
Active
Clean
Sanitized
RinseAgent
3h.
6h.
9h.
_{!iCO!>( ]_i ({}
Half Load
,WARNING
--
Power --
Auto --
Regular -- Delicate -- Quick --------h
Scrub
Wash
Wash
Wash
Wash
Program Select
Delay
Start
(_
BOSCH
.......
You could
be seriously
scalded
if you allow
hot water
to splash
out of the dishwasher.
OPEN THE DOOR CAREFULLY
during
any
wash
or rinse cycle.
Do not fully
open
the door until
water
noises
have stopped.
To Start
Unit;
• Door must be closed.
Press the "ON/OFF"
button
to turn the unit
on.
•
The Countdown
Display
and one of the Wash Cycle
Indicator
Lights will be flashing
to show you are in the Wash Cycle selec-
tion mode.
• Press the "<" or ">" button
to select the desired wash
cycle.
•
If desired
select
the "HALF LOAD" or DELAY START" features
at
this point.
o
In addition
to your
Wash Cycle selection,
for small
loads of
lightly
soiled
dishes
press the "HALF LOAD" button.
This will
save energy,
water.
o If you would
like to delay the start time of the dishwasher
press
the "DELAY"
button
until
the desired
delay time
(1-24
hrs.)
shows
in the Countdown
Display window.
• Press the "START" button
to begin the cycle (Wash Cycle Indicator
Light will stop flashing)
Note: Rinse Agent Indicator
Light will be illuminated
if the unit needs
Rinse Agent.
Child Lock
• After pressing the "START" button you can activate the Child Lock
feature.
• Press and hold down the "<" button until "CL" appears in the
Countdown
Display window. Now any button you press (except
ON/OFF) will not function and '%12will display each time.
• To deactivate, press and hold the "<" button until the "C12disap-
pears from the Countdown
Display window.
To Cancel the Cycle:
• Press and hold the "STARTIRESET" button until the Countdown
Display reads "0:01".
• Wait until the Countdown
Display reads "0:00" and turn the unit
off.
Note:
You
cannot
cancel
a cycle
with
the
Child
Lock
feature
activated.
Setting
Options
(Rinse
Agent
Amount
/ Extra
Dry
Heat
Activation)
• Door must be closed.
Press the "ON/OFF"
button
to turn the unit
on.
• One of the Wash Cycle Indicator Lights will be flashing to show
you are in the Wash Cycle selection mode.
• To enter the Options Setup Mode, press and hold down the ">"
button, then press and release the "START RESET"button, then
release the ">" button.
• The "Sanitized"
Indicator
Light will be flashing
to show you are in
the Options
Setup Mode.
•
Press the ">" button
to select
the option
you would
like to ad-
just
o If the Countdown
Display shows a "d:00"
or "d:01"
are ready to
turn your Extra Dry Heat option
on/off.
o
If the Countdown
Display
shows
a "r:00"
through
"r:06"
you
are ready to set the amount
of Rinse Agent
the unit will dis-
pense.
To Turn
the
Extra
Dry
Heat
On or Off
• With the Countdown
Display showing
a "d:00"
or"d:01"
press the
"<" button
to change
the setting.
o "d:00"
means the Extra Dry Heat is off.
o "d:01"
means the Extra Dry Heat is on
• Press "START" to save your settings.
To Set the
Amount
of Rinse
Agent
Dispensed
NOTE: If your glasses have spots you need more Rinse Agent.
If your
glasses have streaks
you need less Rinse Agent.
• With the Countdown
Display showing
"r:00" through
"r:06"
(r:00 = no rinse aid & r:06 = highest
rinse aid) press the "<"
button
to change
the amount
of Rinse Agent
the unit will
dispense.
• Press "START" to save your settings.
• You are now ready to start a new cycle.
12