Electrolux WTM3000 Installation Manual - Page 13
Browse online or download pdf Installation Manual for Refrigerator Electrolux WTM3000. Electrolux WTM3000 16 pages. Ik007 integration kit refrigeration
Also for Electrolux WTM3000: Installation Manual (16 pages)
- 1. Table of Contents
- 2. Before You Call
- 3. General Warnings
- 4. Refrigerator Integration Kit Items
- 5. Cupboard Dimensions
- 6. Installation of 120˚ Hinge
- 7. Preparation
- 8. Attaching Top Hinge Bracket
- 9. Attaching Slide-Housing to Refrigerator Doors
- 10. Placing Refrigerator in Cupboard
- 11. Refrigerator Alignment
- 12. Attaching Slide-Bar to Cupboard Door
4. Slowly close the cupboard door (pushing the
refrigerator back) until it is slightly ajar, i.e. with a gap
of about 4mm (Figure 11).
You may have to reposition the refrigerator back or forward
until the 4mm gap is obtained. Ensure that the refrigerator
remains parallel as you do this. once you have the correct
gap, proceed to the next step.
Figure 11
4mm
NOTE: The gap is left to ensure the refrigerator door will be
allowed to close fully for a good gasket seal.
SECuRIng ThE REFRIgERaToR In ThE
CuPBoaRd
NOTE: When attaching all screws to cupboard, first drill
a 2mm pilot hole in the correct position. This will allow
easy hand insertion of self tapping screw.
now that the refrigerator is correctly positioned:
1. Screw in top hinge bracket to the cupboard wall using
4 cupboard screws provided. This will secure the top
of the refrigerator (Figure 12).
2. Screw down foot bracket to cupboard floor with 2
cupboard screws. This will secure the bottom of the
refrigerator (Figure 13. Figure 13a for selected
models only).
Figure 12
Fridge
hinge gap
Figure 13
Figure 13a
For WTB2300 & WTB2500
13