AirStage ARXB36GALH Installation Manual - Page 14

Browse online or download pdf Installation Manual for Air Conditioner AirStage ARXB36GALH. AirStage ARXB36GALH 18 pages. Indoor unit (duct type)

Print Page

6.7. Remote sensor (Optional parts)

• For the installation method, please refer to the INSTALLATION MANUAL of remote

sensor.

Connection methods

• Connection terminals

Controller PCB

• Wiring arrangement

• Remove the existing connector and replace it with the remote sensor connector (ensure

that the correct connector is used).

• The original connector should be insulated to ensure that it does not come into contact

with other electrical circuitry.

• Use conduit hole when external output cable is used.

Setting for room temperature correction

When a remote sensor is connected, set the function setting of indoor unit as indicated

below.

• Function Number "30":

Set the Setting Number to "00". (Default)

• Function Number "31":

Set the Setting Number to "02".

* Refer to "7.4. Function setting" for details about Function

Number and Setting Number.

] 1

En-13

Remote sensor

terminal (CN8)

Controller PCB

Clamps

Cable tie

Shield cable

(Field supply)

• For the installation method, please refer to the INSTALLATION MANUAL of IR receiver

unit.

Connection methods

• Connection terminals

Controller PCB

• Wiring arrangement

Controller PCB

] 1

IR receiver unit

terminal (CN18)

Core

Cable tie*

(Field supply)

Clamps