1M2M ED1610 Installation Manual - Page 2
Browse online or download pdf Installation Manual for Accessories 1M2M ED1610. 1M2M ED1610 3 pages.
Print Page
1M2M Click
Installation manual click version
Mounting instructions
The enclosure has a transparent rubber seal in the cover (see image 4, shown as white ring). To be sure the
enclosure is closed properly please follow these instructions.
1. Make sure the transparent rubber ring is placed around the cover.
2. If it is difficult to close the lid you can put a bit of Teflon grease on the ring.
3. To have the best protection against water place the enclosure vertically, with the lid pointed downwards.
Below some examples in Image 5
4. The click mount part has to be mounted to something, especially
the two holes near the lid should be used for mounting the
device. This way the lid will have a strong fit. The other two
optional holes can be used for extra strong mounting.
See image 6.
Installation manual 1M2M Click 17-04-2020 Page 2 of 3
Image 4
Image 5
Image 6