1M2M ED1610 Kurulum Kılavuzu - Sayfa 2

Aksesuarlar 1M2M ED1610 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. 1M2M ED1610 3 sayfaları.

1M2M Click

Installation manual click version

Mounting instructions

The enclosure has a transparent rubber seal in the cover (see image 4, shown as white ring). To be sure the

enclosure is closed properly please follow these instructions.

1. Make sure the transparent rubber ring is placed around the cover.

2. If it is difficult to close the lid you can put a bit of Teflon grease on the ring.

3. To have the best protection against water place the enclosure vertically, with the lid pointed downwards.

Below some examples in Image 5

4. The click mount part has to be mounted to something, especially

the two holes near the lid should be used for mounting the

device. This way the lid will have a strong fit. The other two

optional holes can be used for extra strong mounting.

See image 6.

Installation manual 1M2M Click 17-04-2020 Page 2 of 3

Image 4

Image 5

Image 6