Draper FlexShade Instructions Installation & Operation - Page 4

Browse online or download pdf Instructions Installation & Operation for Projection Screen Draper FlexShade. Draper FlexShade 16 pages. Exterior clutch-operated shade
Also for Draper FlexShade: Installation & Operation Manual (8 pages), Installation Instructions (2 pages), Instructions Manual (12 pages), Installation & Operation Instructions (11 pages), Instructions Installation & Operation (12 pages), Instructions Installation & Operation (16 pages), Instructions Installation & Operation (4 pages), Instructions Manual (7 pages), Instructions Installation & Operation (12 pages)

Print Page
Draper FlexShade Instructions Installation & Operation
FlexShade
®

Section 2 - Mounting Headbox with Brackets

(Standard Installation Method)

Note: Mounting Bracket positioning as directed in Section 1. Ensure brackets are level.
Please Note: Installation requires use of AT LEAST TWO
1.
Attach Mounting Brackets
to mounting surface using
#10 flat head screws.
Install flush with bracket.
Please Note:
Ensure top of bracket is at
least 5/16" below ceiling.
(See Drawing A at right.)
Please Note:
Mounting Brackets
MUST be installed with a
minimum gap of 1 3/4"
(44mm)
between the Endcap and
the Mounting Bracket
edge to allow for Side
Channels. Mark wall.
(See Drawing B at right.)
Note: Mounting height
of product =
Product OM height
2.
Attach Headbox
to brackets.
Lift Headbox into Bracket,
A.
ensuring return of Bracket
fits into Headbox channel.
Crank-Operated ZIP
A
IMPORTANT:
Minimum clearance
of " is required
between ceiling
and bracket in order
to tilt headbox
into bracket.
B.
of the top mounting holes.
(2)
Tilt Headbox into
bottom lip of Bracket.
MOUNTING
1 "
BRACKET
(44 mm)
B
E N D
C A P
B A R
H E M
C.
Tighten
Set Screws.
page 4 of 16