Draper FlexShade Petunjuk Pemasangan & Pengoperasian - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan & Pengoperasian untuk Layar Proyeksi Draper FlexShade. Draper FlexShade 16 halaman. Exterior clutch-operated shade
Juga untuk Draper FlexShade: Panduan Pemasangan & Pengoperasian (8 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Manual (12 halaman), Petunjuk Pemasangan & Pengoperasian (11 halaman), Petunjuk Pemasangan & Pengoperasian (12 halaman), Petunjuk Pemasangan & Pengoperasian (16 halaman), Petunjuk Pemasangan & Pengoperasian (4 halaman), Petunjuk Manual (7 halaman), Petunjuk Pemasangan & Pengoperasian (12 halaman)

Halaman Cetak

FlexShade

Section 2 - Mounting Headbox with Brackets

(Standard Installation Method)

Note: Mounting Bracket positioning as directed in Section 1. Ensure brackets are level.

Please Note: Installation requires use of AT LEAST TWO

Attach Mounting Brackets

to mounting surface using

#10 flat head screws.

Install flush with bracket.

Please Note:

Ensure top of bracket is at

least 5/16" below ceiling.

(See Drawing A at right.)

Please Note:

Mounting Brackets

MUST be installed with a

minimum gap of 1 3/4"

(44mm)

between the Endcap and

the Mounting Bracket

edge to allow for Side

Channels. Mark wall.

(See Drawing B at right.)

Note: Mounting height

of product =

Product OM height

Attach Headbox

to brackets.

Lift Headbox into Bracket,

ensuring return of Bracket

fits into Headbox channel.

Crank-Operated ZIP

IMPORTANT:

Minimum clearance

of " is required

between ceiling

and bracket in order

to tilt headbox

into bracket.

of the top mounting holes.

(2)

Tilt Headbox into

bottom lip of Bracket.

MOUNTING

1 "

BRACKET

(44 mm)

E N D

C A P

B A R

H E M

Tighten

Set Screws.

page 4 of 16