Draper FlexShade Petunjuk Pemasangan & Pengoperasian - Halaman 6

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan & Pengoperasian untuk Layar Proyeksi Draper FlexShade. Draper FlexShade 16 halaman. Exterior clutch-operated shade
Juga untuk Draper FlexShade: Panduan Pemasangan & Pengoperasian (8 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Manual (12 halaman), Petunjuk Pemasangan & Pengoperasian (11 halaman), Petunjuk Pemasangan & Pengoperasian (12 halaman), Petunjuk Pemasangan & Pengoperasian (16 halaman), Petunjuk Pemasangan & Pengoperasian (4 halaman), Petunjuk Manual (7 halaman), Petunjuk Pemasangan & Pengoperasian (12 halaman)

FlexShade

Section 5 - Direct Mounting to Ceiling or Wall

(Alternate Installation Method)

NOTE: This step requires removing Fascia and Roller Assembly.

See Section 3 - Removing Roller Assembly and Section 4 - Removing Fascia

Replace Operator End

of Roller Assembly.

Replace Crank

Crank-Operated ZIP

W A

U N

M O

L E S

H O

Using the tabs on the endcap as a spacing guide, drill

pilot holes through both ends of the Headbox as

applicable for ceiling or wall mounting.

Please Note: Do not drill pilot holes further than 1.5 inches

from ends of the headbox.

L L

T I N

(Page 5)

Attach to mounting surface

using appropriate fasteners.

Please Note: Installer is responsible

for selecting mounting hardware

appropriate for site conditions.

Replace Idler Mounting Gudgeon

on Idler End of Roller Assembly.

Replace Quick

Release Pin.

Proceed to Section 6 -

Installing Side Channels:

Wall or Ceiling

Mounted Shade.

page 6 of 16