Draper FlexShade Instructions Installation et fonctionnement - Page 6

Parcourez en ligne ou téléchargez le pdf Instructions Installation et fonctionnement pour {nom_de_la_catégorie} Draper FlexShade. Draper FlexShade 16 pages. Exterior clutch-operated shade
Également pour Draper FlexShade : Manuel d'installation et d'utilisation (8 pages), Instructions d'installation (2 pages), Manuel d'instructions (12 pages), Instructions d'installation et d'utilisation (11 pages), Instructions Installation et fonctionnement (12 pages), Instructions Installation et fonctionnement (16 pages), Instructions Installation et fonctionnement (4 pages), Manuel d'instructions (7 pages), Instructions Installation et fonctionnement (12 pages)

FlexShade

Section 5 - Direct Mounting to Ceiling or Wall

(Alternate Installation Method)

NOTE: This step requires removing Fascia and Roller Assembly.

See Section 3 - Removing Roller Assembly and Section 4 - Removing Fascia

Replace Operator End

of Roller Assembly.

Replace Crank

Crank-Operated ZIP

W A

U N

M O

L E S

H O

Using the tabs on the endcap as a spacing guide, drill

pilot holes through both ends of the Headbox as

applicable for ceiling or wall mounting.

Please Note: Do not drill pilot holes further than 1.5 inches

from ends of the headbox.

L L

T I N

(Page 5)

Attach to mounting surface

using appropriate fasteners.

Please Note: Installer is responsible

for selecting mounting hardware

appropriate for site conditions.

Replace Idler Mounting Gudgeon

on Idler End of Roller Assembly.

Replace Quick

Release Pin.

Proceed to Section 6 -

Installing Side Channels:

Wall or Ceiling

Mounted Shade.

page 6 of 16