Draper FlexShade Instructions Installation et fonctionnement - Page 8

Parcourez en ligne ou téléchargez le pdf Instructions Installation et fonctionnement pour {nom_de_la_catégorie} Draper FlexShade. Draper FlexShade 16 pages. Exterior clutch-operated shade
Également pour Draper FlexShade : Manuel d'installation et d'utilisation (8 pages), Instructions d'installation (2 pages), Manuel d'instructions (12 pages), Instructions d'installation et d'utilisation (11 pages), Instructions Installation et fonctionnement (12 pages), Instructions Installation et fonctionnement (16 pages), Instructions Installation et fonctionnement (4 pages), Manuel d'instructions (7 pages), Instructions Installation et fonctionnement (12 pages)

Imprimer la page
Draper FlexShade Instructions Installation et fonctionnement
FlexShade
®
Section 7 - Installing Side Channels: Jamb Mounted Shade
IMPORTANT: Side Channels must be installed parallel, plumb, and square,
with a tolerance of +/- 1/ 8 "
A
A
2.
Mark and drill Side Channels
at desired mounting points.
Please Note: REQUIRED attachment of
Side Channel to structure: MINIMUM
of every 24"
.
(61cm)
Jamb Mounting
Crank-Operated ZIP
(3mm)
1.
B
B
.
A.
Use a 3mm Hex Wrench
to remove screws from
Side Channels.
B.
Remove Side
Channel Covers.
WARNING:
Do NOT remove the
Bottom Caps from
Side Channels.
TIP: Use a pencil
to scribe "L"
(left)
and "R"
on
(right)
PENCIL
inside of covers.
page 8 of 16
2.
Remove Fabric Retainer Strips
from Side Channels.
TIP: Use a pencil to scribe "L"
and "R"
on inside of covers.
(right)
PENCIL
U P
3.
Insert Side Channel Guide
into Side Channels.
Please Note: Guides are labeled
"L"
and "R"
.
(Left)
(right)
Please Note: Ensure foam
cushions are not pinched,
folded or deformed.
Angled leg of
FABRIC RETAINER STRIP
must be oriented towards back
Side Channel Cross Section
(left)
FOAM
CUSHION
FOAM
CUSHION