Draper FlexShade Instructions Installation & Operation - Page 8

Browse online or download pdf Instructions Installation & Operation for Projection Screen Draper FlexShade. Draper FlexShade 16 pages. Exterior clutch-operated shade
Also for Draper FlexShade: Installation & Operation Manual (8 pages), Installation Instructions (2 pages), Instructions Manual (12 pages), Installation & Operation Instructions (11 pages), Instructions Installation & Operation (12 pages), Instructions Installation & Operation (16 pages), Instructions Installation & Operation (4 pages), Instructions Manual (7 pages), Instructions Installation & Operation (12 pages)

Print Page
Draper FlexShade Instructions Installation & Operation
FlexShade
®
Section 7 - Installing Side Channels: Jamb Mounted Shade
IMPORTANT: Side Channels must be installed parallel, plumb, and square,
with a tolerance of +/- 1/ 8 "
A
A
2.
Mark and drill Side Channels
at desired mounting points.
Please Note: REQUIRED attachment of
Side Channel to structure: MINIMUM
of every 24"
.
(61cm)
Jamb Mounting
Crank-Operated ZIP
(3mm)
1.
B
B
.
A.
Use a 3mm Hex Wrench
to remove screws from
Side Channels.
B.
Remove Side
Channel Covers.
WARNING:
Do NOT remove the
Bottom Caps from
Side Channels.
TIP: Use a pencil
to scribe "L"
(left)
and "R"
on
(right)
PENCIL
inside of covers.
page 8 of 16
2.
Remove Fabric Retainer Strips
from Side Channels.
TIP: Use a pencil to scribe "L"
and "R"
on inside of covers.
(right)
PENCIL
U P
3.
Insert Side Channel Guide
into Side Channels.
Please Note: Guides are labeled
"L"
and "R"
.
(Left)
(right)
Please Note: Ensure foam
cushions are not pinched,
folded or deformed.
Angled leg of
FABRIC RETAINER STRIP
must be oriented towards back
Side Channel Cross Section
(left)
FOAM
CUSHION
FOAM
CUSHION