Draper SLX17 Brochure & Specs - Page 12

Browse online or download pdf Brochure & Specs for Projection Screen Draper SLX17. Draper SLX17 16 pages. 230v ac scissor lift slx video projector lift
Also for Draper SLX17: Installation And Operation Manual (7 pages), Installation & Operating Instructions Manual (7 pages), Installation & Operation Instructions (8 pages), Installation & Operating Instructions Manual (7 pages)

Print Page

SMS Flatscreen Mounts

SMS Flatscreen Mounts for

For displays less than 37˝diagonal and weights less than 66 lbs. Has VESA mounting hole patterns of 75mm x 75mm, 100mm x

100mm, 100mm x 200mm, 200mm x 200mm, 200mm x 400mm or maximum hole pattern separation of 330mm high x 420mm

wide. Modern designs for mid-sized displays in a variety of choices. Ceiling or wall mounted.

WM T - Wall Mount

Aluminum construction, stylish appearance and design. Back of display

is only 1

⁄

˝away from wall surface. Display can be tilted up to 15°. Can be

mounted to single wall stud or two wall studs spaced at 16˝on center. Sil-

ver ﬁnish. Universal Bracket built in, no additional bracket required.

WM ST

WM T

WM T2 - Wall Mount

Steel construction. Back of display is only 1

Display can be tilted up to 10°. Mounts to two wall studs/supports

spaced at 16˝on center. Silver ﬁnish. Universal Bracket built in, no

additional bracket required.

WM ST - Wall Mount

Back of display is only 3.25˝from wall surface. Display can be tilted up to

12° and rotated 20° side to side. Mounts to single wall stud. Silver ﬁnish.

Universal Bracket built in, no additional bracket required.

Medium

WM T2

⁄

˝ away from wall surface.

www.draperinc.com

Weight Displays

CM ST

400/800/1200/1800 -

Ceiling Mount

Stylish ceiling mount series.

Available in four sizes. Can

hold up to four total displays

depending on display sizes

and length of mount. Displays

can be placed back to back.

Display can be tilted up to

12° and rotated up to 15° side

to side. Each CM ST ceiling

mount includes one M ST Kit

for mounting one display.

Additional M ST Kits re-

quired for additional display.

Silver ﬁnish, black accents.

SMS Accessories for

Medium

Weight Mounts

M ST Kit

Needed when adding additional displays to CM ST ceiling

mounts. One M ST Kit needed for each display. Includes tilt

and swivel feature to tilt display up to 12° and rotate display

approximately 20° side to side. Also includes M Universal

or black ﬁnishes (black ﬁnish matches most SMS Flatscreen

Heavy Weight Mounts).

765-987-7999

Bracket to attach display

(see below). Silver ﬁnish.

M Universal Bracket

Universal Bracket only.

Used to attach Medium

Weight displays to any

Heavy Weight Flatscreen

Mount. Available in silver