Draper 09536 Instructions For Use Manual - Page 8

Browse online or download pdf Instructions For Use Manual for Power Tool Draper 09536. Draper 09536 20 pages. Bench mounted spindle moulder

Print Page

GETTING TO KNOW YOUR SPINDLE MOULDER

A. 2 x M6 Bolts

B. 1 x Pin

C. 2 x Dome Head Bolts

D. 1 x Dome Head Bolt

E. 3 x Plastic Nuts

F . 5 x Dome Head Bolts

G. 8 x M5 Nuts

H. 2 x M6 Nuts

I. 4 x Plastic Nuts

UNPACKING: After removing the packing material, make sure the product is in perfect

condition and that there are no visible damaged parts. If in doubt, do not use the spindle

moulder and contact the dealer from whom it was purchased.

The packaging materials (plastic bags, polystyrene, etc.), must be disposed of in an

appropriate refuse collection container. These materials must not be left within the reach of

children as they are potential sources of danger.

J. 11 x M5 Washers

K. 6 x Small M5 Washers

L. 2 x M6 Washers

M.14 x M5 Spring Washers

N. 6 x M5 Washers

O. 2 x Screws

P . 4 x Wing Nuts

Q. 6 x M5 Short Hex Bolts

R. 8 x M5 Long Hex Bolts

- 7 -

S. 4 x Rubber Washers

T. 4 x C Clips

U 1 x Dome Head Bolt

V. 2 x Dome Head Bolts

W. 1 x Push Guide Bracket

X. 1 x Hand Wheel

Y. 1 x M6 Dome Head Nut

Z. 4 x Collet Adaptors