Draper 09536 Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Draper 09536. Draper 09536 20 страниц. Bench mounted spindle moulder
Печатать страницу
GETTING TO KNOW YOUR SPINDLE MOULDER
A. 2 x M6 Bolts
B. 1 x Pin
C. 2 x Dome Head Bolts
D. 1 x Dome Head Bolt
E. 3 x Plastic Nuts
F . 5 x Dome Head Bolts
G. 8 x M5 Nuts
H. 2 x M6 Nuts
I. 4 x Plastic Nuts
-
UNPACKING: After removing the packing material, make sure the product is in perfect
condition and that there are no visible damaged parts. If in doubt, do not use the spindle
moulder and contact the dealer from whom it was purchased.
The packaging materials (plastic bags, polystyrene, etc.), must be disposed of in an
appropriate refuse collection container. These materials must not be left within the reach of
children as they are potential sources of danger.
J. 11 x M5 Washers
K. 6 x Small M5 Washers
L. 2 x M6 Washers
M.14 x M5 Spring Washers
N. 6 x M5 Washers
O. 2 x Screws
P . 4 x Wing Nuts
Q. 6 x M5 Short Hex Bolts
R. 8 x M5 Long Hex Bolts
- 7 -
S. 4 x Rubber Washers
T. 4 x C Clips
U 1 x Dome Head Bolt
V. 2 x Dome Head Bolts
W. 1 x Push Guide Bracket
X. 1 x Hand Wheel
Y. 1 x M6 Dome Head Nut
Z. 4 x Collet Adaptors