Draper 83652 Instructions Manual - Page 12

Browse online or download pdf Instructions Manual for Power Tool Draper 83652. Draper 83652 16 pages. 135w 230v rotary multi-tool kit with flexible drive shaft
Also for Draper 83652: Instructions Manual (16 pages)

Print Page

BASIC MULTI-TOOL OPERATIONS

8.5

FITTING A CUTTING/SANDING DISC -

FIG. 5

With the disc holder

using the plain slot screwdriver

spanner handle tip). Leave one fibre washer on the

screw, place the cutting disc on the screw and fit the

second fibre washer, refit to the disc holder spindle.

(Do not over tighten).

8.6

FITTING THE SANDING DRUMS - FIG. 6

To fit a drum

, firstly loosen the small screw in the

top of the holder

relax. Slide the sanding drum onto the holder. To secure

simply tighten the screw and the rubber drum will swell,

gripping the drum. (Do not over tighten).

WARNING: Excessive force on this machine will cause

the motor to overheat and fail. This is not covered by

the guarantee.

in the chuck, remove the screw

(incorporated in the

. This will allow the rubber to

FIG.5

FIG.6