Draper 83652 Talimatlar Kılavuzu - Sayfa 12

Elektrikli Alet Draper 83652 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Draper 83652 16 sayfaları. 135w 230v rotary multi-tool kit with flexible drive shaft
Ayrıca Draper 83652 için: Talimatlar Kılavuzu (16 sayfalar)

Sayfayı Yazdır

BASIC MULTI-TOOL OPERATIONS

8.5

FITTING A CUTTING/SANDING DISC -

FIG. 5

With the disc holder

using the plain slot screwdriver

spanner handle tip). Leave one fibre washer on the

screw, place the cutting disc on the screw and fit the

second fibre washer, refit to the disc holder spindle.

(Do not over tighten).

8.6

FITTING THE SANDING DRUMS - FIG. 6

To fit a drum

, firstly loosen the small screw in the

top of the holder

relax. Slide the sanding drum onto the holder. To secure

simply tighten the screw and the rubber drum will swell,

gripping the drum. (Do not over tighten).

WARNING: Excessive force on this machine will cause

the motor to overheat and fail. This is not covered by

the guarantee.

in the chuck, remove the screw

(incorporated in the

. This will allow the rubber to

FIG.5

FIG.6