Advanced Energy Thyro-PX Anybus Manual - Page 4

Browse online or download pdf Manual for Control Unit Advanced Energy Thyro-PX Anybus. Advanced Energy Thyro-PX Anybus 13 pages. Ethernet ip module

Print Page

Advanced Energy

• Configure the flexible link parameters

Adapting Thyro-PX Hardware Configuration

Open parameter file with the unit online in the Port Explorer tab of the Thyro-Tool Pro PC software,

or use the Thyro‑Touch display.

Set the Anybus module slot to Ethernet IP in the Thyro-PX device hardware configuration:

Figure 2. Menu tree

Anybus Parameter Group

When the computer is connected to the Thyro-PX power controller, the Anybus parameter group will

be added to the parameter list after updating the hardware configuration, as shown in the previous

figure.

If the unit is not available for online configuration, the software can also be configured offline.

Contact AE Global Services to obtain a parameter file appropriate to your hardware configuration.

Figure 3. Anybus parameter group

Connecting to the Ethernet IP controller

Some process control software can scan the network to automatically detect and connect to Ethernet

IP devices.

To manually configure the process control software, find the MAC address for the Ethernet IP module

in the General menu. Use the MAC address to configure the process control software.

57010163-00A

™

Thyro-PX

Anybus

Ethernet IP

™

Thyro-PX

Anybus

Ethernet IP