Drawell DW-TDZ5-WS Operation Manuals - Page 12

Browse online or download pdf Operation Manuals for Laboratory Equipment Drawell DW-TDZ5-WS. Drawell DW-TDZ5-WS 20 pages. Benchtop low-speed centrifuge

Print Page

1. How to Operate

6.2 How to Operate

6.2.1 Rotor Installation

The drive spindle in the chamber and the inside cones of rotor should be first

wiped with a piece of soft and clean cloth, then place the rotor with two hands

to the cone side of the drive spindle in the centrifuge chamber, Washer should

be placed before tightening the screw nuts.

6.2.2 Tubes Installation

Place the bracket into the slot of rotor; make sure that the bracket is turning

smoothly, tube sets (adaptors) are placed into holes of brackets, the solution to

be separated into the tubes. Visually check if the solution in the tubes is

roughly equal before putting them into the tube sets.

6.2.3 Preset

1) Function Declaration of Display Window

① Rotor number Display Window:

is on, the window of rotor number is flashing, turn the "ENTER" key to

confirm the number.

② Speed Dispaly Window:

Note: the set speed must not exceed the max. speed limit.

③Time Display Window:

reference to the following sheet 2.

This button can set rotor number, speed and time.

④ Set:

can set rotor number, speed and time.

2) Set button :

Fig.1 Control Panel

press "SET" ,when power indicator (red)light

It can display the running speed and RCF.

The window can display the time and the Erro, Detailed