Bosch 800 Series Use And Care Manual - Page 10

Print Page

Range Features

Sealed Gas Burners

The cooktop has sealed gas burners. As a result, there are

no parts under the cooktop to clean, disassemble or adjust.

Spills stay on top of the cooktop where they are easier to

wipe up.

Burner Caps

The cooktop has three different burner sizes; small,

medium, and large. Match the corresponding letters on the

burner cap and burner base.

The burner cap is porcelainized steel. The burner caps

must be properly placed for the cooktop to function

properly. If the burner cap is not properly placed, one or

more of the following problems may occur:

•

Burner flames are too high.

•

Flames shoot out of burners.

Burner Base

English 7

Burner Grate

Burner Cap

Burner

Cooktop

Ignitor

Matching letter

designation.

•

Burners do not ignite.

•

Burner flames light unevenly.

•

Burner emits gas odor.

9 WARNING

To prevent flare-ups and avoid creation of harmful

by-products, do not use the cooktop without all

burner caps and all burner grates properly

positioned.

9 WARNING

To prevent burns, do not touch burner caps or

grates while hot. Turn the cooktop off and allow the

burners to cool.

Placing Burner Caps

Each cap has a letter (A, D, or F) cast in the underside of

the cap that corresponds to a letter (A, D, or F) cast in the

burner base that is attached to the appliance.

Note: In some models the center burner does not have a

letter designation on the burner base.

•

Place each burner cap on its correct burner base per

its corresponding letter designation. See figure

"Placing Burner Caps" on page 7.

Place burner cap gently on top of base so that the prongs

of the burner base fit snugly into the groove of the burner

cap.

Burner Cap