Bosch 800 Series Use And Care Manual - Page 13

Browse online or download pdf Use And Care Manual for Oven Bosch 800 Series. Bosch 800 Series 49 pages. Built-in wall ovens
Also for Bosch 800 Series: Installation Instructions Manual (24 pages), Installation Manual (40 pages), Use And Care Manual (12 pages), Installation Manual (23 pages), Installation Manual (28 pages), Installation Manual (32 pages), Instruction Manual (32 pages), Installation Manual (32 pages), Quick Start And Safety Manual (7 pages), Use And Care Manual (40 pages), Installation Manual (40 pages), Installation Manual (32 pages), Installation Instructions Manual (40 pages), Installation Manual (48 pages), Use And Care Manual (33 pages), Quick Start Manual (7 pages), Quick Start And Safety Manual (13 pages), Installation Manual (32 pages), Service Manual (36 pages), Installation Instructions Manual (29 pages), Use And Care Manual (24 pages), Use And Care Manual (40 pages), Installation Instructions Manual (28 pages)

Bosch 800 Series Use And Care Manual

Accessories

Probe (some models)
The probe can be used to
determine the internal
doneness or the end
temperature of many
foods, especially meats
and poultry.
Do not clean in the self-
clean oven or dishwasher.
Flat Rack
Use for most cooking. Can
use multiple racks in some
modes.
Do not clean in the self-
clean oven.
Telescopic Rack
(some models)
HEZTR301
(available via eShop)
Use with heavier dishes to
make it easier to place
dishes into the oven,
check on food while
cooking and remove
dishes from oven when
done.
Do not clean in the self-
clean oven.
Broiling Pan
Optional accessory
(available via eShop)
Pan: #00449757
Grill (top): #00449756
Inserting Racks
9 CAUTION
To avoid burns, place oven racks in desired
positions before turning oven on. Always use oven
mitts when the oven is warm. If a rack must be
moved while the oven is hot, do not let oven mitts
contact hot heating elements.
Use caution when removing an oven rack from the
lowest rack position to avoid contact with the hot
oven door.
To avoid possible injury or damage to the appliance,
ensure racks are installed exactly per installation
instructions and not backwards or upside down.
Flat Rack
The rack is designed with a stop so it will stop before
coming completely out of the oven and not tilt.
To insert the flat rack into the oven:
1. Grasp rack firmly on both sides.
2. Insert rack (see picture).
3. Tilt rack up (A) to allow the upwardly sloped rear of the
rack to slide under the stop molded into the front
portion of the rack guide above.
4. When the back of the rack is past this stop, lower the
front of the rack to a horizontal position (B) and push it
the rest of the way in.
The rack should be straight and flat, not crooked.
To remove the flat rack from the oven:
1. Grasp rack firmly on both sides and pull rack toward
you.
2. When the stop is reached, tilt rack up so that the
upwardly sloped back of the rack can pass under the
stop. Pull the rack the rest of the way out.
English 10