Bosch HBC86P753B Instruction Manual - Page 12

Browse online or download pdf Instruction Manual for Oven Bosch HBC86P753B. Bosch HBC86P753B 40 pages. Compact oven with microwave
Also for Bosch HBC86P753B: Installation Instructions (3 pages), Instruction Manual (40 pages)

Print Page
Set the cooking time using the rotary selector.
6.
Press the
button.
n
7.
Appliance operation begins. You can see the cooking time
counting down in the status bar.
The cooking time has elapsed
A signal sounds. Operation has finished. The status bar shows
00:00:00. You can cancel the signal before it has finished
sounding by pressing the

Series of operations

You can use the SeriesOperations function to set up to three
operating modes and then start.
Requirement: you must set a cooking time for each step.

Ovenware

Always use microwave-safe, heat-resistant ovenware.

Setting a series of operations

Set a cooking time for each step in the series of operations.
Press the
2
button.
1.
The button lights up. "SeriesOperations" appears in the
display as the heading. The 1 for the first step in the series of
operations is in brackets.
Select and set the desired operating mode.
2.
Press the
button to return to [1] and use the rotary
Y
3.
selector to select [2] for the second step in the series of
operations.

Time-setting options

You can call up the time-setting options menu by pressing
the
button. The following functions are available:
0
If the oven is switched off:
12
button.
0
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Changing the cooking time
Press the
button and switch to cooking time by turning the
0
rotary selector. Press the
X
to change the cooking time. Press the
Opening the oven door during cooking
Operation is suspended. The oven is paused. The
flashes on the status bar. Close the door and press the
button again. The programme will then continue.
Pausing operation
Press the
button briefly. The oven is paused. Press the
n
button again to continue operation.
Cancelling operation
Press and hold the
n
button until "Select function" appears.
You can now change the settings.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
Select and set the desired operating mode.
4.
Press the
button to return to [2] and use the rotary
Y
5.
selector to select [3] for the third step in the series of
operations.
Select and set the desired operating mode.
6.
Press the
n
button.
7.
Appliance operation begins.
Note: The first step in the series of operations appears in the
display. The cooking time starts counting down.
The cooking time has elapsed
A signal sounds. The series of operations is finished. You can
stop the audible signal by pressing the
Changing the setting
Changes can only be made before operation begins.
Press the
Y
button to move upwards until 1, 2 or 3 appears
1.
in the brackets.
Use the rotary selector to select the step that you wish to
2.
change.
Change the setting.
3.
Cancelling operation
Press and hold the
button until "Select function" appears.
n
You can now change the settings.
Setting the timer
■
Setting the clock
■
If the oven is switched on:
button and turn the rotary selector
button.
0
symbol
n
0
button.
n
n