Bosch HBC86P753B Instruction Manual - Page 14
Browse online or download pdf Instruction Manual for Oven Bosch HBC86P753B. Bosch HBC86P753B 40 pages. Compact oven with microwave
Also for Bosch HBC86P753B: Installation Instructions (3 pages), Instruction Manual (40 pages)
Print PageSetting a later end time
Prerequisite: The selected operation has not already begun and
a cooking time has been set. The
is open.
Switch to "End" by turning the rotary selector. The end time of
1.
the operation is displayed in the second line.
Press the
button.
X
2.
Set a later end time by turning the rotary selector.
3.
Press the
button to close the time-setting options menu.
0
4.
Confirm by pressing the
5.
The setting is adopted. The oven is in
time is displayed in the status bar. When cooking starts, the
cooking time is shown counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
the cooking time as 00:00:00. You can cancel the signal early
by pressing the
button.
0
Memory
Memory gives you the option to store your own settings and
call them up again at the press of a button. There are six
memory locations available. The memory function is useful for
recipes which you prepare particularly frequently.
Storing settings in the memory
You cannot store self-cleaning.
Set the required operating mode. Do not start.
1.
Press and release the
f
2.
select one of the six memory locations.
Press and hold the
f
button until "Memory saved" is
3.
displayed.
The setting is saved and can be started at any time.
14
time-setting options menu
0
button.
n
... standby. The end
0
button and use the rotary selector to
Correcting the end time
This is possible, providing the oven is on standby. Press the
button to open the menu. Use the rotary selector to switch to
end time, press the
button and adjust the end time by
X
turning the rotary selector. Press the
menu.
Cancelling the end time
This is possible, providing the oven is on standby. Press the
button to open the menu. Switch to end time by turning the
rotary selector, press the
X
using the rotary selector until the display goes out. Press the
button to close the menu.
Setting the clock
The oven must be switched off before you can set or change
the clock.
Following a power cut
The "Set clock" heading appears in the display following a
power cut.
Press the
X
button and turn the rotary selector to set the
1.
current time.
Press the
button.
0
2.
The time is applied.
Changing the clock
Example: changing from summer to winter time.
Press the
button.
0
1.
The time-setting options menu appears.
Switch to the clock by turning the rotary selector.
2.
Press the
button and turn the rotary selector to change
X
3.
the time.
Press the
button.
0
4.
The time-setting options menu closes. The time is changed.
Hiding the clock
The current time appears in the display when the oven is
switched off. You can hide the clock. For more information,
refer to the Basic settings section.
Reallocating a memory location
Make the settings, select the memory location and save the
new settings using the
f
overwritten.
Starting the memory
You can start the saved settings at any time.
Press and release the
f
1.
select the memory location.
The stored settings are displayed. If "Memory location empty"
appears, this means that there are no settings stored as yet
in this memory location.
Press the
button.
n
2.
The memory function starts.
Changing the memory location
Once operation has started, you can no longer change the
memory location.
button to close the
0
button and shift the end time back
button. The old settings are
button and use the rotary selector to
0
0
0