Electrolux ENV06 Service Manual - Page 14

Browse online or download pdf Service Manual for Washer Electrolux ENV06. Electrolux ENV06 48 pages.

Print Page

4 DEMO

A special programme allows the demonstration of the operation of these appliances in shops, without the

connection to the water system, in an interactive way with the user:

♦ The interactive way consists in selecting any programme, introducing some options and, after pushing the

start button, the appliance will execute only some phases of the programme, skipping those that cannot be

performed (water fill, drain, heating).

The cycle is performed as follows:

The door lock device is activated normally (door locked during the operation, possibility to open it at the end

of the cycle or in pause).

Motor: all movements at low speed are activated; the pulses and the spin are deactivated.

The water fill solenoids and the drain pump are deactivated.

LCD: it displays all the programme phases very quickly.

Alarms: for safety reasons the alarm families E40 (door closing), E50 (motor) and E90 (communication

between board/configuration) are enabled.

If after the setting of the Demo, the options and the programme are not modified, after three minutes a

continuous cycle starts with the displaying of the various programme phases represented by the DISPLAY

without powering the functional parts of the appliance.

To exit DEMO function, switch the appliance off.

SOI/DT 2007-10 dmm

14/48

599 70 27-90