Electrolux ENV06 Service Manual - Page 15

Browse online or download pdf Service Manual for Washer Electrolux ENV06. Electrolux ENV06 48 pages.

Print Page

5 DIAGNOSTIC SYSTEM

5.1

Access to diagnostics mode

1. Switch off the appliance.
2. Press and hold down START/PAUSE button and the P5 button (as represented in
figure).
3. Holding down both buttons, switch the appliance on by turning the programme selector
by one position clockwise.
1. Continue to hold down the buttons till the display lights up and the "DIAGNOSTIC
TEST" appears.
In the first position, the operation of the buttons, the relative LEDs and the LCD display are
checked; turning the selector knob clockwise the diagnostics cycle for the operation of the
various components and the alarm reading is activated.

5.2 Exiting diagnostics mode

→ To exit the diagnostics cycle, switch the appliance off, then on, and then off again.
When the appliance is switched on again, it is necessary to set the time and language.
SOI/DT 2007-10 dmm
15/48
599 70 27-90