Electrolux ENV06 Service Manual - Page 40

Browse online or download pdf Service Manual for Washer Electrolux ENV06. Electrolux ENV06 48 pages.

Print Page

10 Table of alarm codes of the main PCB

Alarm
Tap closed or water pressure too low; Drain tube improperly positioned; Water fill
E11
solenoid valve is faulty; Leaks from water circuit on pressure switch; Pressure switch
faulty; Wiring faulty; PCB faulty.
Tap closed or water pressure too low; Drain tube improperly positioned; Water fill
E12
solenoid valve is faulty; Leaks from water circuit on pressure switch; Pressure switch
faulty; Wiring faulty; PCB faulty.
Drain tube improperly positioned; Water pressure too low;
E13
Water fill solenoid valve is faulty; Water circuit on pressure switch is leaking/clogged;
Pressure switch faulty.
Drain tube kinked/clogged/improperly positioned; Drain filter clogged/dirty; Drain
E21
pump faulty; Pressure switch faulty; Wiring faulty; PCB faulty; Electrical current leak
between heating element and ground.
Drain tube kinked/clogged/improperly positioned; Drain filter clogged/dirty; Drain
E22
pump faulty; Pressure switch faulty; Wiring faulty; PCB faulty; Electrical current leak
between heating element and ground.
E23
Drain pump faulty; Wiring faulty; PCB faulty.
E24
PCB faulty.
Pressure switch;
E31
Wiring;
Main PCB.
Drain tube kinked/clogged/improperly positioned; Drain filter clogged/dirty; Drain
pump faulty;
E32
Water circuit on pressure switch; pressure switch;
Wiring; main board.
Water fill solenoid valve is faulty; Leaks from water circuit on pressure switch;
E35
Pressure switch faulty; Wiring faulty; PCB faulty.
Water circuit on pressure switches;
E38
Pressure switches;
Motor belt broken.
E3A
PCB faulty.
Door lock unit faulty; Wiring faulty;
E41
PCB faulty.
SOI/DT 2007-10 dmm
Possible fault
40/48
Action/machine status
Cycle is paused with door locked.
Cycle is paused with door locked.
Cycle is paused with door locked.
Cycle is paused (after 2 attempts).
Cycle is paused
Safety drain cycle - Cycle stops with
door unlocked.
Safety drain cycle - Cycle stops with
door unlocked.
Cycle stops with door locked.
Cycle is paused.
Cycle stops. Safety drain cycle.
Drain pump continues to operate (5
min. on, then 5 min. off, etc.).
Heating phase is skipped.
Cycle stops with door locked.
Cycle is paused.
Reset
START/RESET
START/RESET
START/RESET
START/RESET
START/RESET
RESET
RESET
RESET
START/RESET
RESET
ON/OFF RESET
RESET
START/RESET
599 70 27-90