Carlisle Fluid Technologies TC-IR3S-03 Service Manual - Page 5

Browse online or download pdf Service Manual for Service Equipment Carlisle Fluid Technologies TC-IR3S-03. Carlisle Fluid Technologies TC-IR3S-03 11 pages.

Print Page

FIELD OF APPLICATION

The Trisk Devilbiss IR3S are designed to provide an accelerated

and even cure of most automotive refinishing materials.

Typically drying of putty, filler, base and top coats, both

water-based and solvent-based products. Its site of use is the

preparation area and finishing area. Within the automotive

industry and vehicle repair sectors, it is used to dry small areas

and cure materials before polishing.

PRODUCT DESCRIPTION

The easily maneuverable Trisk Devilbiss IR3S are equipped

with both dual and single lamp cassettes for easy adjustment

and flexibility around curved parts without sacrifice to heat

distribution. The design makes cassette adjustment simple.

The IR lamps and reflectors are protected against mechanical

damage with a mesh. The control unit enables flash off (50%

power) and full bake (100% power). The time can be set

individually for each mode (0-30 min).

PARTICULAR ADVANTAGES

Unique reflector design

The Trisk Devilbiss IR3S features a unique dimpled sheet

reflector that generates extremely even curing intensity and

temperature over entire surfaces. This ensures the fastest

possible curing time, while minimizing risk of over-curing or

burning sections of your coating.

TECHNICAL DATA

Electrical diagram, see page 9.

Rated Voltage

Rated power

Heating elements

Fuse*

Weight

Noise level

Max ambient temperature

during operation

Max ambient temperature

during storage and

transportation

* The dryer must be supplied by recommended fuse.

SB-81-014-R1 (3/2023)

TRU CURE IR3S – GENERAL INFORMATION

220V - 240 V, 50/60Hz Single Phase

3 emitters, full power 3000 W

3 quartz, tungsten filament,

Infrared emitters

16 A slow, type C (UK 13A) (NA 20

35 kg

Less than 70 dB (A)

INSTRUCTION TO THE OWNER

The owner of the mobile dryer must produce clear operating

instructions, adapted to local site conditions and applicable

national / regional requirements, and make these available to

all users.

Mobile dryer users must adhere to these operating instructions.

The mobile dryer user must always ensure that sufficient

technical ventilation is complied in accordance with the

applicable national / regional requirements.

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the

appliance by a person responsible for their safety. Children

should be supervised to ensure that they do not play with the

appliance.

Dispose of spent items at the nearest environmental protection

facility for recycling.

WARNINGS

FIRE AND EXPLOSION

Do not use in an area until it is checked and cleared

of combustible and/or flammable materials.

Do not use in an area where the air may contain

flammable dust, gas, or liquid vapors.

Never direct the heating equipment towards any

pressurized vessel.

Never direct the heating equipment towards

combustible or flammable materials.

If you have a distance less than 60 cm/2 feet to the

object the temperature might raise quickly and the

risk for fire increases.

ELECTRICAL EQUIPMENT

The mobile dryer is operated by highly dangerous

electrical voltage.

ACCESSING ELECTRICAL EQUIPMENT

Before accessing live parts, remove the main

connector from the wall socket. Only professional

electricians may have direct access into the electrical

equipment.

If the supply cord is damaged, it must be replaced by

the manufacturer, its service agent or similarly

qualified persons in order to avoid a hazard.

WARNING!

Intensive heat radiation. Hands, face and other parts

of the body should be exposed as little as possible to

the heat radiation.

5 / 11