Dreadbox Nyx V2 Owner's Manual - Page 4

Browse online or download pdf Owner's Manual for Synthesizer Dreadbox Nyx V2. Dreadbox Nyx V2 14 pages. Analog, 2 oscillators, 12-24db dual filter, 2 function generators, extensive digital reverb, 30 eurorack patch points
Also for Dreadbox Nyx V2: Tuning Manual (3 pages)

Print Page

The Oscillators

The Nyx v2 is equipped with 2 voltage-controlled, analog oscillators (VCOs). Both OSC 1 and OSC 2

offer identical controls and features, except OSC 2 offers a triangle wave instead of a pulse wave.

We suggest you to use the Nyx v2 with a MIDI interface, as its paraphony and oscillators' tuning preci-

sion heavily relies on MIDI.

OSC 1 and OSC 2 Controls:

1. TUNE knob - allows for precise tuning of each

VCO at ± 12 semi tones.

2. Octave Switch - transpose the VCO pitch over 3

octaves. When using the synth via CV, this should

be left to the middle position, as it is MIDI based

and calculates the autotuning correction.

3. Wave Select Switch - to select either the saw

wave or pulse wave for OSC 1 or the saw wave or

triangle wave for OSC 2.

4. GLIDE slider - allows independent control of the

glide amount for each VCO. This will only work via

MIDI, CV inputs ignore the GLIDE amount

5. MIXER - controls the level of each VCO. Please note that some "negative" amount is allowed, so as to

assist a better CV via the patch points.

6. SYNC - Hard syncs VCO2 to VCO1 pulse. Please note that if VCO2 is at a lower frequency than VCO1,

the effect can often have no result.

How to make an EXTREME DEEP BASS sound. Here is an example you MUST try. Make sure that the

Oscillators are tuned with precision.