Dreadbox Nyx V2 Owner's Manual - Page 5

Browse online or download pdf Owner's Manual for Synthesizer Dreadbox Nyx V2. Dreadbox Nyx V2 14 pages. Analog, 2 oscillators, 12-24db dual filter, 2 function generators, extensive digital reverb, 30 eurorack patch points
Also for Dreadbox Nyx V2: Tuning Manual (3 pages)

Print Page

The Dual Filter

Filter Controls:

1. CUTOFF knob - sets the Cutoff frequency of both filters

2. RES knob - controls the amount of resonance (sometimes

referred as Q) to the filter cutoff frequency

3. OFFSET knob - sets the Cutoff difference of the second fil-

ter. Normally is set at 50%

4. MOD ROUTE

OFF: No Modulator (MOD) controls the Filter

1/2 : MOD1 controls Filter1

MOD2 controls Filter2

1+2 : Both Modulators control both Filters

1 : Only MOD1 controls the Filter

About the Dual Filter

The Nyx V2 Synthesizer, is equipped with 2 pre-fed Filters, each at 12dB/oct. You can achieve various

Filter combinations, from a Classic 24dB/oct Low Pass or even a variable width Band Pass.

Please refer to the "ROUTING" for more info.

The Modulators

Nyx V2 offers 3 Digital Modulators/

Envelopes. MOD1, MOD2 and the AMP

modulator.

When on Envelope mode, each time a

MIDI note is ON or a Gate is triggered,

the Envelopes will start doing their cycle.

ENVELOPE

LEVEL

NOTE ON

NOTE OFF

When on LFO or Drone (for the AMP) Mode, the Modulators function as Cycling Envelopes.

Having both Rise and Fall at 0% and Hold at a decent amount, will

result in a constant high, but with short "off" bursts.

Rise stands for the Attack time

Fall is the Decay and Realease time

Hold is the Sustain Level

Rise is the rise time

Fall is the fall time

Hold is the time that is left on a high state