Anchor bigfoot Owner's Manual - Page 13

Browse online or download pdf Owner's Manual for Speakers Anchor bigfoot. Anchor bigfoot 13 pages. Line array sound system
Also for Anchor bigfoot: Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages)

Anchor bigfoot Owner's Manual
Bigfoot® Sound System Owners Manual
CONDITION
No Sound (power LED off)
No Sound (power LED on)
Shortened Battery Life
Distorted Sound
Excessive Hum or Noise
HAVING TROUBLE WITH YOUR WIRELESS SYSTEM? (Wireless Models Only)
CONDITION
No Sound (RX Indicator: ON)
No Sound (RX Indicator: OFF)
Rated Power Output
Max SPL @ Rated Power
Battery
Frequency Response
Line Output (post fader)
AC Power Reqs.
USB Power Out
Dimensions Closed (HWD)
Dimensions Opened (HWD) 68.6" x 15.3" x 24.0" (174 x 39 x 61cm)
Weight
HAVING TROUBLE WITH YOUR SOUND SYSTEM?
POSSIBLE SOLUTION
• turn POWER switch ON
• charge battery or plug in AC cord
• if unit overheats it goes into "protection mode",
turn it off, lower volume, then turn back on
• check for output from source
• make sure all cables are completely plugged in
• turn up volume control of input used
• charge battery fully; if battery life continues to deteriorate,
contact Anchor Audio customer service: 800.262.4671
• lower system volume control
• use shielded cables
• use balanced microphone
POSSIBLE SOLUTION
• set MUTE switch to on (handheld mic only)
• turn up WIRELESS volume control
• make sure mic is plugged into body pack transmitter
• push mic power button ON
• turn Bigfoot POWER switch ON
• make sure transmitter power switch is ON
• set receiver and transmitter to same channel
• replace battery in transmitter
NEED MORE HELP? Bigfoot Sound System Setup & Operation Videos!
Visit Our Website: www.anchoraudio.com
BIGFOOT TECHNICAL SPECIFICATIONS
400 Watts AC/DC
Microphone Inputs:
130 dB @ 1 meter
Three 12 V rechargeable, 9.0 Ah
Full recharge: approx 8 hrs
Line In
100 Hz – 15 kHz ± 3dB
Sensitivity For Rated Output
isolated, 600 W, 1/4" phone
Lo-Z Microphone
100 – 240 VAC, 50/60 Hz, 300W max
Hi-Z Microphone
5V 500mA
Auxiliary (line)
42.3" x 15.3" x 24.0" (107 x 39 x 61cm)
75 lbs / 34 Kg
(Specifications Subject to Change Without Notice)
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
Anchor Audio only warranties products sold by authorized Anchor Audio dealers.
Anchor Audio is unable to repair products that are out of warranty. Please visit
the Anchor FAQ page at http://www.anchoraudio.com/anchor-faq.html for more
information on battery replacement options.
To locate an authorized dealer near you, please contact [email protected].
Anchor Audio products are warranted to be free from defects in materials and
workmanship for the period of SIX (6) YEARS from the date of original purchase
unless listed below:
1.
All microphone and beltpack transmitters shall be warranted for a TWO (2)
YEAR period.
2.
Batteries shall be warranted for a TWO (2) YEAR period.
3.
PortaCom and ProLink 500 headsets and beltpacks shall be warranted for a
TWO (2) YEAR period.
4.
All woodworking shall be warranted for a TWO (2) YEAR period.
5. CouncilMAN and Assistive Listening Systems shall be warranted for a TWO
(2) YEAR period.
6.
All cases and covers shall be warranted for a TWO (2) YEAR period.
Lo-Z (1 KW), balanced, XLR
12 VDC condenser mic (phantom) power
Hi-Z (10 KW), unbalanced, 1/4" phone
balanced, 1/4" & 1/8" stereo
-52 dBV (2.5 mVrms)
-43 dBV (7.5 mVrms)
-14 dBV (200 mVrms)
Anchor Audio Warranty
ANCHOR AUDIO CUSTOMER SERVICE
800.262.4671
FOR ADDITIONAL INFORMATION
visit www.anchoraudio.com
MADE IN USA
SIX YEAR WARRANTY
13