Common Sense RC SNAP&FLY Owner's Manual - Page 16

Browse online or download pdf Owner's Manual for Toy Common Sense RC SNAP&FLY. Common Sense RC SNAP&FLY 17 pages. 3-in-1 rtf modular airplane system

Print Page

C. Replacing the Motor

To remove the motor:

1) Slightly push the motor retaining lever backward to release the motor;

2) Remove the motor from the motor mount, as shown in Photo 5C1.

To install a motor:

1) Situate the motor such that the motor shaft is inserted through the motor mount front

hole,

2) Slightly push the motor retaining lever backward, making room for the motor to slide

into position,

3) Press the motor body toward the motor mount,

4) Assist the motor retaining lever back into position to lock the motor in place, as

shown in Photo 5C2.

D. Replacing the Transmitter Batteries

Replace the transmitter batteries (4 1.5V AA sized) when the following signs appear:

1) The transmitter-state LED - (b) in Photo 3A, becomes steadily flashing, indicating low

battery voltage;

2) LiPo battery charging time become excessively long, or the charging-state LEDs

behave abnormally;

3) The transmitter can not establish frequency-lock with a receiver, or often loses

control;

SNAP&FLY -- Modularized RC Airplanes

Photo 5C2 – install a motor

www.itcanfly.com

Photo 5C1 – remove the motor