AND UA-705 Instruction Manual - Page 10

Browse online or download pdf Instruction Manual for Blood Pressure Monitor AND UA-705. AND UA-705 15 pages.

Print Page

If a subsequent measurement is required, turn off the power and turn it on again.

When "0 " is displayed, the device is ready for another measurement.

Note: Allow at least three minutes between measurements on the same person.

9. Automatic power-off function

If the device is left on after a measurement, it will turn off automatically after about one

minute. It may be turned off at any time by pressing the

button.

Notes For Proper Measurement

Sit down in a comfortable position. Place the arm to be used for the measurement

on a table or other support so that the center of the cuff will be at the same height

as your heart.

Relax for about five or ten minutes before taking a measurement. If you are

excited or depressed by emotional stress, the measurement will reflect this stress

as a higher (or lower) than normal blood pressure reading and the pulse reading

will usually be faster than normal.

Your blood pressure varies constantly, depending on what you are doing and

what you have eaten. What you drink can have a very strong and rapid effect on

your blood pressure.

This device bases its measurements on the heartbeat. If you have a very weak or

irregular heartbeat, the device may have difficulty determining your blood

pressure.

Should the device detect a condition that is abnormal, it will stop the

measurement and display an error symbol. Refer to page 4 for the descriptions of

the symbols.

This blood pressure device is intended for use by adults only. Consult with your

physician before using this device on a child. A child should not use this device

unattended.

Measurement with storing data ( Refer to page 8)

Press the

START

device. The device can store the last thirty sets of data for each button.

Recalling data

Press and hold the

Stored data are automatically displayed in order from

the last data.

Clearing data

Remove battery to clear all data. Re-install it again.

Operation Mode

button. Blood pressure is measured and data is stored within the

button to recall the data.

START

English 9

START

Press and hold

Data number

Alternation

Stored Data