Carmanah SC315-G Quick Start Manual - Page 12

Browse online or download pdf Quick Start Manual for Lighting Equipment Carmanah SC315-G. Carmanah SC315-G 16 pages. Cabinet-based systems
Also for Carmanah SC315-G: Manual (11 pages), Energy Management System Replacement Manual (12 pages), Cabinet Door Replacement Manual (10 pages), Manual (9 pages), Manual (10 pages), Install Manual (14 pages), Manual (10 pages), Manual (10 pages)

Print Page

5.1

Push Button Installation (SC315-G / R820-G)

If the G Series is wired for a pushbutton but none is needed (such as an

advance RRFB), insulate the ends and secure the wires.

The push button can be connected in either polarity.

1. For round poles, cut holes to size and tap as required. Deburr the hole that the push button wiring will

pass through.

2. Feed the push button cable through the pole, creating a drip loop.

6.1 EMS Programming and Testing

The G Series' Energy Management System (EMS) has several programming functions and settings. These are

accessed through the On-Board User Interface (OBUI). Specific products will use a subset of the complete OBUI

settings, which will be covered in this manual's sections specific to each product.

6.2

The EMS OBUI has three buttons to navigate and change settings and activate functions as required. The Up

arrow, Down arrow, and SET button are used to scroll through menus, access and change settings, and accept

new settings.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

G SERIES QUICK START GUIDE

carmanah.com