Andatech AlcoSense PRO User Manual - Page 6

Browse online or download pdf User Manual for Test Equipment Andatech AlcoSense PRO. Andatech AlcoSense PRO 9 pages. Personal breathalyser

Print Page

This product must be used in accordance with the instructions in this manual and

– in particular - must not be allowed to get wet.

This product is intended to provide the user with an indication of alcohol on the

breath. However, neither the manufacturer nor the supplier gives any warranty

(express or implied) that the product can give any indication of blood alcohol level.

A person's BAC (Blood Alcohol Concentration) can only be accurately measured by the

administration of a blood test. This product only measures breath alcohol content

which, in turn, only gives an approximately indication of blood alcohol concentration.

In these circumstances the user of this product should not rely on the

information provided thereby as an accurate indication of his blood alcohol

concentration or of his level of intoxication or of his fitness to drive and in

particular should not take any action in reliance on such information as the

product can provide no more than an indication of alcohol on the breath.

If the user of this product makes any decision or takes any action based on the

use of the product such decision or such action shall be at the sole risk of the

user and neither the manufacturer nor the supplier assumes any responsibility

for such decision or action. In particular, neither the manufacturer nor the

supplier shall be in any way liable if the user of the product asserts that the

product led him to believe that he was fit to operate a motor vehicle and is

subsequently found not to be so fit.

This product is certified pursuant to Australian Standard AS 3547 as a type 2 hand

held qualitative device.

The AlcoSense

Pro uses a semiconductor sensor to measure breath alcohol

levels. Depending upon the amount of alcohol registered by the sensor after a

period of time, it will require recalibration. Andatech recommends the AlcoSense

Pro to be calibrated every 6 months or after 200 uses, whichever comes first.

For technical support please contact 1300 800 200.

Version 4.1. Updated 26.07.2018