Andatech AlcoSense PRO Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Испытательное оборудование Andatech AlcoSense PRO. Andatech AlcoSense PRO 9 страниц. Personal breathalyser
Печатать страницу
1.
This product must be used in accordance with the instructions in this manual and
– in particular - must not be allowed to get wet.
2.
This product is intended to provide the user with an indication of alcohol on the
breath. However, neither the manufacturer nor the supplier gives any warranty
(express or implied) that the product can give any indication of blood alcohol level.
3.
A person's BAC (Blood Alcohol Concentration) can only be accurately measured by the
administration of a blood test. This product only measures breath alcohol content
which, in turn, only gives an approximately indication of blood alcohol concentration.
4.
In these circumstances the user of this product should not rely on the
information provided thereby as an accurate indication of his blood alcohol
concentration or of his level of intoxication or of his fitness to drive and in
particular should not take any action in reliance on such information as the
product can provide no more than an indication of alcohol on the breath.
5.
If the user of this product makes any decision or takes any action based on the
use of the product such decision or such action shall be at the sole risk of the
user and neither the manufacturer nor the supplier assumes any responsibility
for such decision or action. In particular, neither the manufacturer nor the
supplier shall be in any way liable if the user of the product asserts that the
product led him to believe that he was fit to operate a motor vehicle and is
subsequently found not to be so fit.
6.
This product is certified pursuant to Australian Standard AS 3547 as a type 2 hand
held qualitative device.
The AlcoSense
Pro uses a semiconductor sensor to measure breath alcohol
®
levels. Depending upon the amount of alcohol registered by the sensor after a
period of time, it will require recalibration. Andatech recommends the AlcoSense
Pro to be calibrated every 6 months or after 200 uses, whichever comes first.
For technical support please contact 1300 800 200.
Version 4.1. Updated 26.07.2018
®