Community R.35-3896-EN Installation And Operation Manual - Page 10
Browse online or download pdf Installation And Operation Manual for Speakers Community R.35-3896-EN. Community R.35-3896-EN 13 pages. R series
Print Page
SPECIFICATIONS
Additional technical information and full specifications are available by contacting the
Technical Applications Group (TAG) or your sales representative.
TECHNICAL SPECIFICATIONS
Operating Mode
Operating Environment
Operating Range
1,2
Nominal Beamwidth
Triaxial Transducers
Continuous Power Handling @
Nominal Impedance
3
Sensitivity
4
Nominal Maximum SPL
4
(Whole Space)
Autoformer Taps/Impedance
Declared values of SPL
1/3 Oct band CPB,
1W/4m, per EN54-24 (Hz:dB)
Coverage (-6dB)
Horiz/Vert per EN54-24
Required Accessories
PHYSICAL
Input Connection
Mounting/Suspension Points
Input Panel Weather Cover
Environmental
Dimensions H x W xD
Weight
Finish
OPTIONS
Accessories
Footnotes
1. Operating Range: 10dB from rated sensitivity
2. Axes and Planes: See Diagram (page 11)
3. Continuous Power Handling: IEC, 2 hours
4. Measurement Environment: All measurements are made in outdoor free-field conditions
5. Sensitivity/Max SPL @ 4m (per EN54-24): "Music" mode must be used for applications necessitating EN54-24 compliance
6. Nominal Max SPL @ 1m: Calculated from continuous power handling and sensitivity @ 1m
7. Rated Noise Power (per EN54-24): The 100W/ 100V and 50W/100V taps are certified for EN54-24 use. Low impedance, all 70V inputs, and 200W/100V tap are not rated
for EN54-24 use.
Page 10
Passive, Low impedance or 70V/100V
All Conditions, suitable for continuous outdoor direct exposure
95 Hz to 19 kHz
90° x 60°
LF 1 x 8" Carbon ring hydrophobically-treated cone, 3" VC
MF 2 x 2.35" MultiSource Waveguide™ compression
HF 1 x 1" exit compression
56V
400W @ 8 ohms (1600W peak)
1W/1m
1W/4m
5
Continuous
124 dB
@1m
6
@4m
5,7
103.4 dB
25W (70V), 50W (100V) Tap: 143 Ω
50W (70V), 100W (100V) Tap: 75 Ω
500: 69.3, 630: 69.7, 800: 69.2, 1000: 69.2,
1250: 70.5, 1600: 69.1, 2000: 67.5, 2500: 70.8,
3150: 69.4, 4000: 71.7
500Hz: 146 / 180
1 kHz: 110 / 110
Digital Signal Processor; 80 Hz 24 dB / Octave High Pass Filter
NL4 Speakon-type connector for low impedance operation only;
and 7-position terminal strip for low impedance or constant voltage operation
Two M8 rigging points, zinc-rich epoxy dual-layer powder-coated yoke,
included integral safety cable mounting point
Color-matched ABS plastic with 13.5mm ID gland nut installed in 21mm knockout
IP55W per IEC 60529 (with a recommended 5° down-tilt); designed to meet MIL-STD-810G standard
279 x 330 x 343 mm (11" x 13" x 13.5")
15.4 kg (34 lbs) with included yoke
Refer to the Technical Drawing
R-VTY35: Provides pan-tilt aiming; color-matched zinc-rich epoxy DLPC steel with SS hardware
R-FRY35: Provides full rotation mounting capability for down-firing application; color-matched zinc-rich
epoxy DLPC steel with SS hardware
Installation and Operation Manual
Music
98 dB
82.4 dB
Peak
Continuous
130 dB
126 dB
at 100W/100V tap
100W (70V), 200W (100V) Tap: 41 Ω
200W (70V), N/A (100V) Tap: 23 Ω
2 kHz: 88 / 103
4 kHz: 81 / 46
Speech
100 dB
Peak
132 dB
R.35-3896-EN