Carogusto sisisi QEAMER Installation And Operating Instructions Manual - Page 14
Browse online or download pdf Installation And Operating Instructions Manual for Coffee Maker Carogusto sisisi QEAMER. Carogusto sisisi QEAMER 20 pages.
Also for Carogusto sisisi QEAMER: User Manual (9 pages)
Print Page
10. Care
26
WARNING: Use a liquid decalcifier with citric
acid and follow with the mixing ratio. A total
amount of 700 ml (0.7 litres) of liquid is
needed to decalcify the device.
Replace the water tank with the descalcifier
➔
(without filter cartridge).
After replacing the water tank with the decalci-
fier (0.7 liters) the Rinse button lights up.
By pressing the Rinse button you are
➔
confirming that decalcifier is present in the
water tank.
The decalcification programme begins. The
display shows "DECALC" with a progress bar.
Once the decalcifier has gone through, the
display shows the "Rinse water tank" symbol.
Remove the water tank and rinse it out with
➔
plenty of fresh water.
Replace the filter cartridge in the water
➔
tank and fill it with with fresh water up to
the "MAX" mark.
After replacing the water tank with fresh water,
the Rinse button lights up.
By pressing the Rinse button you are
➔
confirming that fresh water is present in
the water tank.
The device will now be rinsed.
The display shows the "Rinsing" symbol.
The decalcification process is complete.
10.3 Transport setting
10. Care
After rinsing, the device heats up and is
ready for preparation. The display shows the
"READY" symbol.
The transport setting consists of an automatic
drainage programme that can prevent frost
damage in winter.
WARNING: The device may only be transport-
ed after the automatic drainage process has
been carried out and the transport setting is
activated.
Requirements: The display shows "READY".
In the display menu (see Chapter 9) under the
menu point "Service" you can find the "Trans-
port setting" setting.
Use the arrow keys to select this option
➔
then press the OK button.
The operating menu "Transport setting" will
appear.
Use the arrow keys to select "Start" then
➔
press the OK button.
The transport setting begins. First the device
is rinsed with water. The display shows the
"Rinsing" symbol.
27