Electrolux 316488524 Installation, Use & Care Manual - Page 12

Browse online or download pdf Installation, Use & Care Manual for Ventilation Hood Electrolux 316488524. Electrolux 316488524 20 pages. 30” and 36” free-standing range hood

Print Page

Electrolux 316488524 Installation, Use & Care Manual

Installing the hood

Making the electrical connections

Electrical Shock Hazard

Warning: Turn off power at the service panel before

wiring this unit.

120 V

AC, 15 or 20 Amp cir

120 VAC, 15 or 20 Amp cir

120 V

AC, 15 or 20 Amp cir

AC, 15 or 20 Amp circuit r

ELECTRICAL GROUNDING INSTRUCTIONS

THIS APPLIANCE IS FITTED WITH AN ELECTRICAL

JUNCTION BOX WITH 3 WIRES, ONE OF WHICH

(GREEN/YELLOW) SERVES TO GROUND THE

APPLIANCE. TO PROTECT YOU AGAINST

ELECTRIC SHOCK, THE GREEN AND YELLOW

WIRE MUST BE CONNECTED TO THE

GROUNDING WIRE IN YOUR

HOME ELECTRICAL SYSTEM, AND IT MUST

UNDER NO CIRCUMSTANCES BE CUT OR REMO-

VED.

Failur

e to do so can r

Failur

Failure to do so can r

e to do so can r

e to do so can result in death or electrical

shock.

• Remove junction box cover and knockout on the

top left side.

cuit r

equir

ed.

cuit requir

cuit r

equired.

equir

ed.

esult in death or electrical

Knockout

Junction box

cover

• If not already done, install 1/2" conduit connector

in j-box.

House

wiring

U.L. listed

wire nut

• Run black (live), white (neutral), and green (earth)

wires (#14 AWG) according to the National

Electrical Code or CSA Standards and local

codes and ordinances in 1/2" conduit from power

supply to j-box.

• Connect black, white, and green wires from

power supply to black, white, and green/yellow

wires in j-box respectively.

• These connections should be done while always

making reference to the electrical diagram found

inside the hood.

• Close j-box cover and reapply screws.

Metal electrical

conduit