Andrew 400BPDM-C Installation Instructions

Browse online or download pdf Installation Instructions for Cables and connectors Andrew 400BPDM-C. Andrew 400BPDM-C 2 pages. Connector attachment

Print Page

Connector Attachment

For Braided Cable CNT-400

Din Male, Captivated Pin, Clamp-type Body

Connector: 400BPDM-C

Connector Body

Straighten first 200.0 mm (7.874") min.

of the cable.

200 mm (7.874") min.

Remove 5.0 mm (0.197") of foil & foam,

exposing the center conductor.

Remove all foam/glue residue from the

center conductor.

Don't damage center conductor

5.0± 0.5 mm

(0.197± 0.020")

Fold back braid around part A and comb braid as shown,

the braid should be straight and equally spaced after comb.

Clear all residual braid wire

Tools

Cable Attachment

Remove 6.5 mm (0.256") of Jacket only.

Taper braid towards center conductor as shown;

According to illustration below to push and rotate slightly part A onto cable without

damaging the braid.

Bulletin 7677441

Andrew Institute offers installation training.

Safety

Wire

File

Knife

Brush

Comb braid straight with wire brush;

Fold back braid as shown.

6.5± 0.5 mm

(0.256± 0.020")

Cut off the redundant braid as shown.

Revision A

Page 1 of 2

16 mm

Torque

Diagonal

Wrench

Pliers