Electrolux CHDI 8610 Operating And Installation Manual - Page 19

Browse online or download pdf Operating And Installation Manual for Ventilation Hood Electrolux CHDI 8610. Electrolux CHDI 8610 24 pages. Cooker hood
Also for Electrolux CHDI 8610: Operating And Installation Instructions (20 pages)

Print Page

• For extractor versions (13A), connect the other end of the exhaust

pipe to the flue.

For filter versions (13F), fit deflector F to the support and secure it to

the bracket supplied using 4 screws, then connect the exhaust pipe

to the connection ring located on the deflector.

• Fit the nuts with fixing hooks (14) supplied inside the top and bottom

sections of the flues at the rectangular slots. A total of 10 nuts must

be fitted.

• Join the two top sections of the flue to cover the support (15) so that

one of the slots on the sections is situated on the same side of the

control panel and the other on the opposite side. Screw the two

sections together with 4 screws (2 each side- see the plan diagram

for joining the two sections).

• Fix the top flue assembly to the support, near the ceiling, with two

screws (16 - one each side).