Electrolux CHDI 8610 Kullanım ve Kurulum Kılavuzu - Sayfa 19

Havalandırma Davlumbazı Electrolux CHDI 8610 için çevrimiçi göz atın veya pdf Kullanım ve Kurulum Kılavuzu indirin. Electrolux CHDI 8610 24 sayfaları. Cooker hood
Ayrıca Electrolux CHDI 8610 için: Çalıştırma ve Kurulum Talimatları (20 sayfalar)

Sayfayı Yazdır

• For extractor versions (13A), connect the other end of the exhaust

pipe to the flue.

For filter versions (13F), fit deflector F to the support and secure it to

the bracket supplied using 4 screws, then connect the exhaust pipe

to the connection ring located on the deflector.

• Fit the nuts with fixing hooks (14) supplied inside the top and bottom

sections of the flues at the rectangular slots. A total of 10 nuts must

be fitted.

• Join the two top sections of the flue to cover the support (15) so that

one of the slots on the sections is situated on the same side of the

control panel and the other on the opposite side. Screw the two

sections together with 4 screws (2 each side- see the plan diagram

for joining the two sections).

• Fix the top flue assembly to the support, near the ceiling, with two

screws (16 - one each side).