Electrolux Icon E368WV60ES Installation Instructions Manual - Page 16

Browse online or download pdf Installation Instructions Manual for Ventilation Hood Electrolux Icon E368WV60ES. Electrolux Icon E368WV60ES 18 pages. Wall-mount canopy vent hood
Also for Electrolux Icon E368WV60ES: Use & Care Manual (14 pages), Factory Parts Catalog (4 pages), Specification Sheet (2 pages), Wiring Diagram (1 pages), Specification Sheet (2 pages), Installation Instructions Manual (18 pages)

Print Page

Installation

MAKING THE ELECTRICAL CONNECTION

WARNING

•

Ensure that the power supply is disconnected before proceeding.

•

Verify that the power supply matches the ratings found on the appliance data

plate before proceeding.

•

The complete appliance must be properly grounded at all times when electrical

power is applied.

•

Do not ground the appliance with the neutral (white) house supply wire. A

separate ground wire must be utilized.

•

If aluminum house supply wiring is used, splice the appliance copper wires to the

aluminum house wiring with special connectors designed and agency-certified

for this purpose. Follow the connector manufacturer's recommended procedure

carefully. Improper connection can result in a fire hazard.

•

Failure to complete electrical connections properly may result in a damaged or

nonfunctional system. Follow the wiring diagrams carefully to ensure a proper

installation.

Figure 13

BLK

120VAC, 60Hz, 15A

WHT

Supply power from

Gnd d

GRN

dedicated circuit breaker

Hood Wiring Diagram

Electrical power source wiring can be

connected through the top or back of the

hood. Access the wiring inside the hood

canopy in the area to the right side of the

power ventilator.

Connect the pre-wired 12" long black, white

and green wires to the corresponding

black, white and ground (green) wire from

the power source wiring. Use wire nut

connectors to secure the connections.