Electrolux Icon E368WV60ES Kurulum Talimatları Kılavuzu - Sayfa 16

Havalandırma Davlumbazı Electrolux Icon E368WV60ES için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Electrolux Icon E368WV60ES 18 sayfaları. Wall-mount canopy vent hood
Ayrıca Electrolux Icon E368WV60ES için: Kullanım ve Bakım Kılavuzu (14 sayfalar), Fabrika Parça Kataloğu (4 sayfalar), Şartname Sayfası (2 sayfalar), Kablo Bağlantı Şeması (1 sayfalar), Şartname Sayfası (2 sayfalar), Kurulum Talimatları Kılavuzu (18 sayfalar)

Installation

MAKING THE ELECTRICAL CONNECTION

WARNING

•

Ensure that the power supply is disconnected before proceeding.

•

Verify that the power supply matches the ratings found on the appliance data

plate before proceeding.

•

The complete appliance must be properly grounded at all times when electrical

power is applied.

•

Do not ground the appliance with the neutral (white) house supply wire. A

separate ground wire must be utilized.

•

If aluminum house supply wiring is used, splice the appliance copper wires to the

aluminum house wiring with special connectors designed and agency-certified

for this purpose. Follow the connector manufacturer's recommended procedure

carefully. Improper connection can result in a fire hazard.

•

Failure to complete electrical connections properly may result in a damaged or

nonfunctional system. Follow the wiring diagrams carefully to ensure a proper

installation.

Figure 13

BLK

120VAC, 60Hz, 15A

WHT

Supply power from

Gnd d

GRN

dedicated circuit breaker

Hood Wiring Diagram

Electrical power source wiring can be

connected through the top or back of the

hood. Access the wiring inside the hood

canopy in the area to the right side of the

power ventilator.

Connect the pre-wired 12" long black, white

and green wires to the corresponding

black, white and ground (green) wire from

the power source wiring. Use wire nut

connectors to secure the connections.