Dri-Eaz Dragon K85 Mobile Owner's Manual - Page 10

Browse online or download pdf Owner's Manual for Furnace Dri-Eaz Dragon K85 Mobile. Dri-Eaz Dragon K85 Mobile 20 pages. Dri-eaz dragon k85 mobile furnace owner's manual
Also for Dri-Eaz Dragon K85 Mobile: Owner's Manual (14 pages)

Print Page

The internal fuel tank drain plug

WARNING! Diesel fuel is flammable and potentially

explosive. Always turn off and unplug the Dragon before

draining the internal fuel tank. Do not smoke while

draining fuel. Keep away from open flame.

1. Place an appropriate container beneath the drain

plug to catch any remaining fuel oil.

2. Remove the drain plug with a wrench.

3. Allow the internal fuel tank to drain completely.

4. Screw the drain plug back into the Dragon. Tighten

with a wrench.

5. Dispose of excess fuel oil in accordance with local

regulations.

Using the Dragon as a ventilator

The Dragon may also be used purely as a ventilator to

deliver clean, unheated air to an affected area.

NOTICE: If you are ventilating spaces adjacent to

living areas, you must still create a negative pressure in

the affected area. This will help prevent contaminants

from being forced into clean areas. See the section

"Establishing negative air pressure" for more

information.

1. Set up the Dragon as directed in the section "Setting

up the Dragon." However, you do not need to add fuel,

attach the flue, or connect the remote thermostat. As a

ventilator the Dragon will operate on electricity alone.

2. Turn the FAN switch to "On."

MAINTENANCE

Replacing the fuel intake filter

The fuel intake filter should be replaced at least once

every year. Depending on the quality of fuel oil and the

frequency of use, the fuel intake filter may need to be

replaced more frequently.

07-00407 E 08/2006

You will need:

•

Phillips screwdriver

•

Clean shop rags

1. Remove the housing cover for the fuel pump/blower

assembly and the fuel line guard plate. To do this,

remove the six Phillips screws that secure the

housing cover and guard plate.

Remove the fuel pump/blower assembly housing and guard plate

2. Close the fuel line shut-off valve by turning the red

knob clockwise.

Close the fuel line shut-off valve