Electrolux MCH 660 Instruction Book - Page 13

Browse online or download pdf Instruction Book for Ventilation Hood Electrolux MCH 660. Electrolux MCH 660 17 pages.

Print Page

Venting

The hood is more effective when used in the

extraction setting (ducted to the outside).

Venting kits may be purchased through your

retailer or DIY store, and must be ducted to

an outside vent of 100mm (4") minimum.

The ducting used must be manufactured from

fire retardant material which should conform to

the relevant British Standard or DIN4102-B1.

When the hood is ducted externally the

charcoal filter must be removed and the

slider control must be in the ducting position.

To Fit the Ducting

Fit the ducting spigot and blanking plate, by

aligning the interlocking lugs on the fittings, with

the recesses in the aperture as illustrated in (A)

and (B) opposite.

Insert and turn anti-clockwise to lock the spigot

and blanking plate into position.

Recirculation

The charcoal filter must be fitted for recirculation and

the slider control must be in the recirculation position.

Fitting the Cooker Hood to the

Wall

Remove the grille by pressing inwardly on the

two slide catches.

Hinge the grille forward to free it from the guides

in the side of the casing. The two keyhole slots

are now visible.

Hook the hood onto the screws using the keyho-

le slots.

Tighten the screws to secure the hood to the

wall. Ensure the cooker hood is correctly

located before letting go.

Refit the grille onto the cooker hood

- insert the left hand hinge pin into the hole in

the left hand side of the casing.

- slide the right hand hinge pin into the guide

over the stop position.

- close the grille and secure using the two slide

catch bolts.